|
Bead Board
EPS Insulation Building Products
For Builders and
Do-It-Yourselfers
EPS INSULATION
-
![[Bullet]](bullet.gif)
Efficient
Versatile
More R-Value Per
Dollar
No other ridged board insulation gives your customer
as much R-value per dollar as Cellofoam® EPS. It's the best insulation value
on the market. But the good news doesn't stop there.
Cellofoam EPS insulation performs. It's R-value is
stable and predictable; it won't drift down as the years pass. Plus
Cellofoam has the compressive strength and the inherent moisture resistance
to withstand forces that can destroy other insulation products.
Cellofoam EPS is easily trimmed with hand tools to fit
your specific application, yet it has the strength to absorb normal job site
abuse.
Design
Values of Cellofoam EPS
Density: 1.0 pcf
(normal)
R-Value*: 3.85 @ 75º F
Compressive Strength:
10 - 14 psi
Flexural Strength: 25
- 30 psi
Water Vapor Transmission Rate:
2.0 - 5.0 perm-inches
Water Absorption: Less
Than 4.0% by Volume
Oxygen Index: 24%
*R-Value is the resistance to
heat flow.
The higher the R-Value, the
greater the insulating power.
All EPS insulation products
manufactured by Cellofoam North America Inc meet applicable standards
including:
ASTM C578-92 (formerly HH - 1 - 524C)
HUD/FHA Use of Material, Bulletin #71
ICBO
BOCA
SBCCI
Underwriters Laboratories Inc.
Military Spec. MILP - 19644C
Military Spec. MILP - 40619A
Recommend Cellofoam EPS
insulation with confidence!
Warning: This
product is combustible and if exposed to a fire of sufficient heat and
intensity may burn rapidly. It should not be left exposed or inadequately
protected. Consult specific instructions for use accompanying this product.
|
